Touchscreen thermostat | Setting The Program
Setting the program on your underfloor heating thermostat makes it more energy efficient to run, the Allbrite touch screen is easy to use and energy efficient.
Setting the program cycle
The All-Touch thermostat comes with the option of 2 or 4 setpoint per a day, the default is 4 setpoints per a day.
The All-Touch underfloor heating thermostat is a 5/1/1 programable system which means Mon-Fri is set the same Saturday is different and Sunday is different.
Setting 1 and 3 are the comfort levels when you want the heating to be on, setting 2 and 4 are economy when the underfloor heating will be set at lower temperatures.
To set the programs follow the procedures below:
Press P once and the time will start flashing and the small number 1 will appear on the left of the screen. Set the time using the arrows up / down to the time you require the underfloor heating to switch on.
Once the desired time is set press P, the temperature display will start flashing, set the temperature to the desired level you would like the room or the floor heated to (this is variant on the mode selected), usually 21 for room temperature or 25 for floor temperature.
Press P again and the second setpoint will show with the time flashing, set the time using arrow up and down and continue proceedure as above, setpoint 2 is usually set to 16 Degrees C.
Continue the proceedures for all setpoints and days.
Default settings.
Setpoint 1: Time 07:00 at 21 Degrees C
Setpoint 2: Time 08:00 at 16 Degrees C
Setpoint 3: Time 16:30 at 21 Degrees C
Setpoint 4: Time 21:00 at 16 Degrees C
Buy the touchscreen thermostat online