Setting the floor limit is a function that is only used in air and floor mode and you will not be able to be set in air only mode and floor only.

The default floor limit is 28 degrees C and this is the setting we recommend unless you floor covering manufacturer insists on a lower temperature.

.

---

Step 1

Click and hold button number 4 until the temperature starts flashing.

Step 2

Use the up or down arrow (button 5 or 6) to set the temperature to the desired value.

Step 3

Press button number 4 to save your settings.

Please note - If the floor limit temperature is set too low it may cause the underfloor heating to switch off earlier than required causing the room not to be heated effectively.